Akvafors Softening vessels SF 2169 Triplex (CLACK Control Valve)
7800.00 €
Compare products
The SF Triplex series is designed to continuously soften water. Particularly suitable for boiler houses, residential buildings and industrial enterprises. It is able to purify not only hardness salts, but also completely purify water from iron content. In the cleaning process, a reagent (NaCl or salt in tablets) is used, which is used to regenerate the filter material (resin). The washing water of this unit can be discharged into biological treatment plants (treatment plants)
The SF Triplex Series kit consists of three filter columns, three control units, three two-way electrical valves and three salt tanks. Filter columns are filled with ion exchange resin (cationic), which reduces hardness and filters iron. The control unit automatically rinses the unit. The salt container is filled with reagent (NaCl, salt in tablets) to remove the resin. Depending on the amount of resin and the quality of the water, the device has a certain amount of water for processing. The control unit retains all information even in the event of a power failure.
Installation requires an electrical connection (one outlet), sewage and water at the inlet / outlet with a minimum pressure of 2.5 bar.
The device can be located in wet rooms or in underground mines.
Recommendation! It is recommended to test the water for the chemical composition of the water before choosing equipment.
Recommendation! It is recommended that a mechanical cleaning filter be installed in front of the machine to ensure a longer machine life.
The SF Triplex Series kit consists of three filter columns, three control units, three two-way electrical valves and three salt tanks. Filter columns are filled with ion exchange resin (cationic), which reduces hardness and filters iron. The control unit automatically rinses the unit. The salt container is filled with reagent (NaCl, salt in tablets) to remove the resin. Depending on the amount of resin and the quality of the water, the device has a certain amount of water for processing. The control unit retains all information even in the event of a power failure.
Installation requires an electrical connection (one outlet), sewage and water at the inlet / outlet with a minimum pressure of 2.5 bar.
The device can be located in wet rooms or in underground mines.
Recommendation! It is recommended to test the water for the chemical composition of the water before choosing equipment.
Recommendation! It is recommended that a mechanical cleaning filter be installed in front of the machine to ensure a longer machine life.